 |
Standards Compliance
Apollo® Steel Ball Valves Standards Compliance / Product Approvals:
Standards of Compliance
Except where specifically noted all valves within this family of products complies with the requirements of this listed standard.
- ASME B16.5 - ”Pipe Flanges and Flanged Fittings”
- ASME B16.10 - ”Face to Face Dimensions of Valves”
- ASME B16.34 - ”Valves - Flanged, Threaded, and Welding End”
- ASME B16.33 - “Manual Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig”
- ASME B16.38 - “Large Metallic Valves for Gas Distribution (Manually
- Operated NPS 2-1/2” to 12”, 125 psig)”
- ASME B31.1 - “Power Piping”
- ASME B31.3 - “Chemical Plant and Petroleum Refinery Piping”
- ASME B31.8 - “Gas Transmission and Distribution Piping Systems”
- API 607 - ”Fire Test - Soft Seated Quarter Turn Valves” (-24 Option Required)
- API 608 - ”Ball Valves - Flanged, Threaded, and Welding End”
- MSS SP-25 - ”Standard Marking System for Valves”
- MSS SP-61 - ”Pressure Testing of Steel Valves”
- MSS SP-72 - ”Ball Valves with Flanged or Buttweld Ends”
- UL 125 - “Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)”
Product Aprovals
- AAR Approval No. E989052 (87A-108-24, 88A-108-24 & 88A-148-24)
Approval No. E989053 (87A-100-24, 88A-100-24 & 88A-140-24)
- CSA (Reference: ASME B16.33 & B16.38)
- UL (Reference: Control Number 195H)
- UL (YSDT) LP-Gas Shut-Off Valves
- UL (MHKZ) Manual Valves
- UL (YRBX) Flammable Liquid Shut-Off Valves
- UL (YRPV) Gas Shut-Off Valves
- UL (YQNZ) Compressed Gas Shut-Off Valves
- UL (YQAR) Anhydrous Ammonia Shut-Off Valve
Materials
Part |
Material |
| 1. Body |
ASTM A216 WCB |
| 2. Retainer |
ASTM A108 Type 1215 |
| 3. Ball |
ASTM A108 Type 1215 Chrome Pit |
| 4. Stem |
ASTM A108 Type 1215 |
| 5. Packing Gland |
ASTM A108 Type 1215 |
| 6. Stem Seals |
PTFE |
| 7. Seats |
RPTFE |
| 8. Gland Screws |
ASTM A193 B7 |
| 9. Gland Plate |
302 & 304 SS |
| 10. Stem Nut |
316 SS |
| 11. Lever |
ASTM A366 Steel with Vinyl Grip |
| 12. Stem Bearing |
RPTFE |
| 13. Stop |
ASTM A108 Type 1215 |
| 14. Stop Screw |
SAE J429 Grade 2 |
| 15. Lock Plate |
ASTM A366 Steel |
| 16. Body Seal |
RPTFE |
| 17. Lockwasher |
302 or 304 SS |
| 18. Grounding Spring |
SS |
Variations
88A-740 Series (316 SS Ball & Stem)
88A-730 Series (Ni-Cu Ball & Stem)
Temperature Curves
Model Number: 88A-700 (1-1/2" to 2")
Dimensions
 
| Part No. |
Size
in./mm |
A
in./mm |
B
in./mm |
C
in./mm |
D
in./mm |
E
in./mm |
F
in./mm |
G
in./mm |
| 88A-707-01A |
1-1/2
40 |
1.250
31.750 |
7.500
190.500 |
4.690
119.126 |
3.620
91.948 |
6.030
153.162 |
0.050
1.270 |
1.620
41.148 |
| 88A-708-01 |
2
50 |
1.500
38.100 |
8.500
215.900 |
5.190
131.826 |
4.620
117.348 |
6.650
168.910 |
0.720
18.288 |
2.410
61.214 |
| Part No. |
Size
in./mm |
H
in./mm |
I
in./mm |
J
in./mm |
K
in./mm |
L
in./mm |
N
in./mm |
Tapping |
| 88A-707-01A |
1-1/2
40 |
2.150
54.610 |
1.390
35.306 |
0.700
17.780 |
0.500
12.700 |
0.290
7.366 |
1.500
38.100 |
5/16-18 |
| 88A-708-01 |
2
50 |
3.090
78.486 |
1.950
49.530 |
0.970
24.638 |
0.630
16.002 |
0.410
10.414 |
2.000
50.800 |
1/4-20 |
Options
(SUFFIX) |
OPTION |
SIZES |
| -01- |
Standard (Locking Kit and Grounded Stem) |
1 1/2" to 2" |
| -10- |
SS Lever and Nut |
1 1/2" to 2" |
| -14- |
Side Vented Ball (See Page J-2) |
1 1/2" to 2" |
| -15- |
Wheel Handle |
1 1/2" to 2" |
| -21- |
UHMWPE Seats |
1 1/2" to 2" |
| -24- |
Fire Safe (Graphite Packing and Seal) |
1 1/2" to 2" |
| -35- |
PTFE Seats and Seals |
1 1/2" to 2" |
| -38- |
PEEK Seats and Graphite Packing |
1 1/2" to 2" |
| -49- |
Assembled Dry |
1 1/2" to 2" |
| -60- |
Grounded Ball and Stem |
1 1/2" to 2" |
| -65- |
MPTFE Seats and Graphite Packing |
1 1/2" to 2" |
| -67- |
Cleaned For Industrial Gases |
1 1/2" to 2" |
| -69- |
Drilled and Tapped Purge Ports with Plugs |
1 1/2" to 2" |
| -70- |
4" Extended Bonnet |
1 1/2" to 2" |
| -76- |
Live Loaded 87A / 88A Series (Lever) |
1 1/2" to 2" |
| -80- |
Multi-Seal (Super TFE) 87A / 88A Series |
1 1/2" to 2" |
|
