 |
Standards Compliance
Apollo® Steel Ball Valves Standards Compliance / Product Approvals:
Standards of Compliance
Except where specifically noted all valves within this family of products complies with the requirements of this listed standard.
- ASME B16.5 - ”Pipe Flanges and Flanged Fittings”
- ASME B16.10 - ”Face to Face Dimensions of Valves”
- ASME B16.34 - ”Valves - Flanged, Threaded, and Welding End”
- ASME B16.33 - “Manual Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig”
- ASME B16.38 - “Large Metallic Valves for Gas Distribution (Manually
- Operated NPS 2-1/2” to 12”, 125 psig)”
- ASME B31.1 - “Power Piping”
- ASME B31.3 - “Chemical Plant and Petroleum Refinery Piping”
- ASME B31.8 - “Gas Transmission and Distribution Piping Systems”
- API 607 - ”Fire Test - Soft Seated Quarter Turn Valves” (-24 Option Required)
- API 608 - ”Ball Valves - Flanged, Threaded, and Welding End”
- MSS SP-25 - ”Standard Marking System for Valves”
- MSS SP-61 - ”Pressure Testing of Steel Valves”
- MSS SP-72 - ”Ball Valves with Flanged or Buttweld Ends”
- UL 125 - “Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)”
Product Aprovals
- AAR Approval No. E989052 (87A-108-24, 88A-108-24 & 88A-148-24)
Approval No. E989053 (87A-100-24, 88A-100-24 & 88A-140-24)
- CSA (Reference: ASME B16.33 & B16.38)
- UL (Reference: Control Number 195H)
- UL (YSDT) LP-Gas Shut-Off Valves
- UL (MHKZ) Manual Valves
- UL (YRBX) Flammable Liquid Shut-Off Valves
- UL (YRPV) Gas Shut-Off Valves
- UL (YQNZ) Compressed Gas Shut-Off Valves
- UL (YQAR) Anhydrous Ammonia Shut-Off Valve
Materials
Part |
Material |
| 1. Body |
ASTM A351 CF8M |
| 2. Retainer |
ASTM A276 Type 316 |
| 3. Ball |
ASTM A276 Type 316 or A351 CF8M |
| 4. Stem |
ASTM A276 Type 316 |
| 5. Packing Gland |
ASTM A276 Type 316 |
| 6. Stem Seals |
PTFE |
| 7. Seats |
RPTFE |
| 8. Gland Screws |
ASTM A193 B8 Class 1 |
| 9. Gland Plate |
316 SS |
| 10. Stem Nut |
18-8 SS |
| 11. Lever |
316 SS |
| 12. Stem Bearing |
RPTFE |
| 13. Stop |
ASTM A276 Type 316 |
| 14. Stop Screw |
316 SS |
| 15. Lock Plate |
302 or 304 SS |
| 16. Body Seal |
RPTFE |
| 17. Grounding Spring |
SS |
| 18. Body Joint Stud |
ASTM A193 Grade B8M |
| 19. Body Joint Nut |
ASTM A194 Grade 8 |
| 20. Pipe Handle Galvanized Steel |
(not shown) |
Contact factory for actuator mounting dimensions.
Variations
88A-740 Series (316 SS Ball & Stem)
88A-730 Series (Ni-Cu Ball & Stem)
Temperature Curves
Model Number: 88A-700 (4" to 8")
Dimensions
 
| Part No. |
Size
in./mm |
A
in./mm |
B
in./mm |
C
in./mm |
D
in./mm |
E
in./mm |
F
in./mm |
G
in./mm |
| 88A-70A-01 |
4
100 |
3.000
76.200 |
12.000
304.800 |
5.680
144.272 |
8.800
223.520 |
3.880
98.552 |
0.500
12.700 |
4.750
120.650 |
| 88A-70C-01 |
6
150 |
4.000
101.600 |
15.880
403.352 |
7.380
187.452 |
9.990
253.746 |
5.130
130.302 |
0.500
12.700 |
5.940
150.876 |
| 88A-70E-01 |
8
200 |
6.000
152.400 |
19.750
501.650 |
9.000
228.600 |
13.730
348.742 |
7.000
177.800 |
1.000
25.400 |
7.750
196.850 |
| Part No. |
Size
in./mm |
H
in./mm |
I
in./mm |
J
in./mm |
K
in./mm |
L
in./mm |
N
in./mm |
Tapping |
| 88A-70A-01 |
4
100 |
5.950
151.130 |
2.840
72.136 |
1.420
36.068 |
1.250
31.750 |
0.730
18.542 |
4.000
101.600 |
3/8-16 |
| 88A-70C-01 |
6
150 |
7.130
181.102 |
2.840
72.136 |
1.420
36.068 |
1.250
31.750 |
0.730
18.542 |
6.000
152.400 |
3/8-16 |
| 88A-70E-01 |
8
200 |
9.480
240.792 |
4.600
116.840 |
2.300
58.420 |
2.000
50.800 |
1.380
35.052 |
8.000
203.200 |
3/4-10 |
Options
(SUFFIX) |
OPTION |
SIZES |
| -01- |
Standard (Locking Kit and Grounded Stem) |
4" to 8" |
| -14- |
Side Vented Ball (See Page J-2) |
4" to 8" |
| -21- |
UHMWPE Seats |
4" to 8" |
| -24- |
Fire Safe (Graphite Packing and Seal) |
4" to 8" |
| -35- |
PTFE Seats and Seals |
4" to 8" |
| -49- |
Assembled Dry |
4" to 8" |
| -57- |
Oxygen Cleaned |
4" to 8" |
| -60- |
Grounded Ball and Stem |
4" to 8" |
| -65- |
MPTFE Seats and Graphite Packing |
4" to 8" |
| -67- |
Cleaned For Industrial Gases |
4" to 8" |
| -69- |
Drilled and Tapped Purge Ports with Plugs |
4" to 8" |
| -70- |
Extended Bonnet |
4" to 8" |
| -73- |
316 SS Spiral Wound Gaskets w/PTFE |
4" to 8" |
| -74- |
316 SS Spiral Wound Gaskets w/Graphite Filler |
4" to 8" |
| -76- |
Live Loaded 87A / 88A Series (Lever) |
4" to 8" |
| -80- |
Multi-Seal (Super TFE) 87A / 88A Series |
4" to 8" |
| -MG- |
Gear Operator with Standard Handwheel |
4" to 8" |
| -MH- |
Gear Operator with Standard Handwheel & Locking Device |
4" to 8" |
| -MJ- |
Gear Operator with Oversize Handwheel |
4" to 8" |
| -MK- |
Gear Operator with Oversize Handwheel & Locking Device |
4" to 8" |
|
