Apollo Valves, Apollo Valve, Apollo Ball Valves

Stocking Distributor For:

	RAM
	Powell
	Apollo
	Resun
	Titan
	Mueller
	Flowtek
	Crane

Also Stocking:

	Jamesbury
	Velan
	Flowseal
	Keystone
	Durco
	Xomox
	Vogt
	Edwards
	Bonney

Download Brochure

88A-900

Description: Carbon Steel ANSI Class 300 Flanged Full Port Ball Valve
Sizes: 1-1/2" to 2-1/2"
Ends: ANSI Class 300 Flanged

Features

Except where specifically noted all valves within this family of products include all listed features as standard.

Two Position Locking Device (Valves 6”FP & smaller, 8”SP & smaller)
CHV Style Adjustable Stem Seals
Four Point ISO 5211 Mounting Pad Bolt Pattern
Slot Vented Ball for Thermal Expansion
Rated 150 psig Saturated Steam
Anti-static Grounded Ball and Stem
Blow-out Proof Stem Design
Cast Boss for Bleed / Drain Port
Vacuum Service to 29 inches of Hg
NACE MR0175-2000 Compliance on all 87A/87B

Standards Compliance

Apollo® Steel Ball Valves Standards Compliance / Product Approvals:

Standards of Compliance

Except where specifically noted all valves within this family of products complies with the requirements of this listed standard.

ASME B16.5 - ”Pipe Flanges and Flanged Fittings”
ASME B16.10 - ”Face to Face Dimensions of Valves”
ASME B16.34 - ”Valves - Flanged, Threaded, and Welding End”
ASME B16.33 - “Manual Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig”
ASME B16.38 - “Large Metallic Valves for Gas Distribution (Manually
Operated NPS 2-1/2” to 12”, 125 psig)”
ASME B31.1 - “Power Piping”
ASME B31.3 - “Chemical Plant and Petroleum Refinery Piping”
ASME B31.8 - “Gas Transmission and Distribution Piping Systems”
API 607 - ”Fire Test - Soft Seated Quarter Turn Valves” (-24 Option Required)
API 608 - ”Ball Valves - Flanged, Threaded, and Welding End”
MSS SP-25 - ”Standard Marking System for Valves”
MSS SP-61 - ”Pressure Testing of Steel Valves”
MSS SP-72 - ”Ball Valves with Flanged or Buttweld Ends”
UL 125 - “Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)”

Product Aprovals

AAR Approval No. E989052 (87A-108-24, 88A-108-24 & 88A-148-24)
Approval No. E989053 (87A-100-24, 88A-100-24 & 88A-140-24)
CSA (Reference: ASME B16.33 & B16.38)
UL (Reference: Control Number 195H)
UL (YSDT) LP-Gas Shut-Off Valves
UL (MHKZ) Manual Valves
UL (YRBX) Flammable Liquid Shut-Off Valves
UL (YRPV) Gas Shut-Off Valves
UL (YQNZ) Compressed Gas Shut-Off Valves
UL (YQAR) Anhydrous Ammonia Shut-Off Valve

Materials

Part	Material
1. Body	ASTM A216 WCB
2. Retainer	ASTM A216 WCB
3. Ball	ASTM A216 WCB or A216 WCB Chrome Plt
4. Stem	ASTM A108 Type 1215
5. Packing Gland	ASTM A108 Type 1215
6. Stem Seals	PTFE
7. Seats	RPTFE
8. Gland Screws	ASTM A193 B7
9. Gland Plate	302 & 304 SS
10. Stem Nut	ASTM A194 Grade 8l
11. Lever	ASTM A366 Steel with Vinyl Grip
12. Stem Bearing	RPTFE
13. Stop	ASTM A108 Type 1215
14. Stop Screw	SAE J429 Grade 2
15. Lock Plate	ASTM A366 Steel
16. Body Seal	RPTFE
17. Grounding Spring	SS
18. Body Joint Stud	ASTM A193 Grade B7
19. Body Joint Nut	ASTM A194 Grade 2H
20. Lockwasher	302 or 304 SS

Contact factory for actuator mounting dimensions.

Variations

88A-940 Series (316 SS Ball & Stem)
88A-930 Series (Ni-Cu Ball & Stem)

Temperature Curves

Model Number: 88A-900 (1-1/2" to 2-1/2")

Dimensions

Part No.	Size in./mm	A in./mm	B in./mm	C in./mm	D in./mm	E in./mm	F in./mm	G in./mm
88A-900-01	1-1/2 40	1.500 38.100	7.500 190.500	3.500 88.900	4.620 117.348	6.650 168.910	0.720 18.288	2.410 61.214
88A-90A-01	2 50	2.000 50.800	8.500 215.900	4.000 101.600	5.610 142.494	8.400 213.360	0.800 20.320	3.310 84.074
88A-90C-01	2-1/2 65	2.500 63.500	9.500 241.300	4.440 112.776	6.230 158.242	8.400 213.360	0.800 20.320	3.930 99.822

Part No.	Size in./mm	H in./mm	I in./mm	J in./mm	K in./mm	L in./mm	Tapping
88A-900-01	1-1/2 40	3.090 78.486	1.950 49.530	0.970 24.638	0.630 16.002	0.410 10.414	5/16-18
88A-90A-01	2 50	4.080 103.632	1.950 49.530	0.970 24.638	0.750 19.050	0.480 12.192	5/16-18
88A-90C-01	2-1/2 65	4.700 119.380	1.950 49.530	0.970 24.638	0.750 19.050	0.480 12.192	5/16-18

Options

(SUFFIX)	OPTION	SIZES
-01-	Standard (Locking Kit and Grounded Stem)	1 1/2" to 2 1/2"
-14-	Side Vented Ball (See Page J-2)	1 1/2" to 2 1/2"
-14-	Side Vented Ball (See Page J-2)	1 1/2" to 2 1/2"
-15-	Wheel Handle	1 1/2" to 2 1/2"
-21-	UHMWPE Seats	1 1/2" to 2 1/2"
-21-	UHMWPE Seats	1 1/2" to 2 1/2"
-24-	Fire Safe (Graphite Packing and Seal)	1 1/2" to 2 1/2"
-24-	Fire Safe (Graphite Packing and Seal)	1 1/2" to 2 1/2"
-35-	PTFE Seats and Seals	1 1/2" to 2 1/2"
-35-	PTFE Seats and Seals	1 1/2" to 2 1/2"
-38-	PEEK Seats and Graphite Packing	1 1/2" to 2 1/2"
-38-	PEEK Seats and Graphite Packing	1 1/2" to 2 1/2"
-49-	Assembled Dry	1 1/2" to 2 1/2"
-49-	Assembled Dry	1 1/2" to 2 1/2"
-60-	Grounded Ball and Stem	1 1/2" to 2 1/2"
-60-	Grounded Ball and Stem	1 1/2" to 2 1/2"
-65-	MPTFE Seats and Graphite Packing	1 1/2" to 2 1/2"
-65-	MPTFE Seats and Graphite Packing	1 1/2" to 2 1/2"
-67-	Cleaned For Industrial Gases	1 1/2" to 2 1/2"
-67-	Cleaned For Industrial Gases	1 1/2" to 2 1/2"
-69-	Drilled and Tapped Purge Ports with Plugs	1 1/2" to 2 1/2"
-69-	Drilled and Tapped Purge Ports with Plugs	1 1/2" to 2 1/2"
-70-	4" Extended Bonnet	1 1/2" to 2 1/2"
-70-	4" Extended Bonnet	1 1/2" to 2 1/2"
-76-	Live Loaded 87A / 88A Series (Lever)	1 1/2" to 2 1/2"
-80-	Multi-Seal (Super TFE) 87A / 88A Series	1 1/2" to 2 1/2"
-MG-	Gear Operator with Standard Handwheel	1 1/2" to 2 1/2"
-MG-	Gear Operator with Standard Handwheel	1 1/2" to 2 1/2"
-MH-	Gear Operator with Standard Handwheel & Locking Device	1 1/2" to 2 1/2"
-MH-	Gear Operator with Standard Handwheel & Locking Device	1 1/2" to 2 1/2"
-MJ-	Gear Operator with Oversize Handwheel	1 1/2" to 2 1/2"
-MJ-	Gear Operator with Oversize Handwheel	1 1/2" to 2 1/2"
-MK-	Gear Operator with Oversize Handwheel & Locking Device	1 1/2" to 2 1/2"
-MK-	Gear Operator with Oversize Handwheel & Locking Device	1 1/2" to 2 1/2"